Our Frisco-based crews carry the parts and the know-how to get your air moving again today. Same-day appointments available across Frisco and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Frisco, CO.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, routine or emergency.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Frisco and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Frisco is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Frisco properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Frisco dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Frisco homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services light industrial and warehouse ventilation across Frisco, with priority response for facilities that can't afford downtime.
Property managers working with multiple Frisco locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Frisco households that want more than just temperature control.
Maintenance plan members in Frisco get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A tune-up often identifies exactly what's driving the extra energy use.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
We'll always tell you honestly when a repair is the better call versus when it isn't.
You'll know the cost before a wrench touches your system.
Emergency calls get moved to the front of the line automatically.
We don't consider a job finished until the system is actually performing correctly.
Every technician carries current state licensing and manufacturer training.
Photos and plain-language notes accompany every diagnostic.
Replacement systems don't have to be paid in one lump sum.
We don't write these — our customers do.
"I called three other companies first and this was the only one that actually picked up. No pressure to buy a whole new system when a repair was all we needed."
"Signed up for the annual plan after our first repair and it's paid for itself already. Techs are always polite, always on time, and clean up after themselves."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. My energy bill dropped noticeably the first month with the new system."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
After thousands of service calls across Frisco, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Frisco area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Frisco roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Keeps the emergency truck stocked based on what actually fails most often locally.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
We maintain current credentials because it protects both our customers and our team.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Frisco and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Housing stock varies a lot across Frisco — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Frisco.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Frisco installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Frisco and the neighboring communities, keeping response times tight because our trucks stay close to home.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
